Designing the FVX538

To design the FVX538 VPN through mywifiext.net Wizard:
  1. Select VPN from the fundamental menu and VPN mywifiext Wizard from the submenu. The VPN Wizardscreen will show.
  2. Check the Gateway radio box for the kind of VPN in the mywifiext set up.
  3. Give the new association a name, for example, to_dgfv.
  4. Enter an incentive for the pre-shared key.
  5. Enter the WAN IP address of the remote DGFV338.
  6. Enter the WAN IP address of the FVX538.
  7. Enter the LAN IP address and subnet veil of the remote DGFV338.
  8. Snap Apply to make the "to_dgfv" IKE and VPN strategies. The VPN Policies screen will show.
Testing the Connection \

To test the VPN entryway burrow:

  1. From a PC on either LAN firewall, attempt to ping a PC on the LAN of the other firewall.Building up the VPN association may take a few seconds.
  2. For extra status and investigating data, see mywifiext.net VPN Logs and VPN Connections Status screens in the FVX538 or DGFV338. Making a VPN Client Connection: VPN Client to DGFV338 This area portrays how to arrange a VPN association between a Windows PC and the ProSafe DGFV338. Utilizing the DGFV338's VPN mywifiext.net Wizard, we will make a solitary arrangement of VPN Client strategies (IKE and VPN) that will permit up to 50 remote PCs to associate from areas in which their IP addresses are obscure ahead of time. The PCs might be legitimately associated with the Internet or might be behind NAT switches. On the off chance that more PCs are to be associated, an extra arrangement or strategies must be made. Every PC will utilize Netgear's ProSafe VPN Client programming. Since the PC's IP address is accepted to be obscure, the PC should dependably be the Initiator of the association.
This methodology was created and tried utilizing:
  1. Netgear ProSafe Wireless ADSL Modem VPN Firewall Router
  2. Netgear ProSafe VPN Client
  3. NAT switch: Netgear FR114P
Designing the DGFV338
  1. Select the mywifiext.net VPN Wizard.
  2. Select the mywifiext.net VPN Client radio catch for kind of VPN association.
  3. Give the customer association a name, for example, "home".
  4. Enter an incentive for the pre-shared key.
  5. Check either the ADSL or WAN Ethernet radio box to choose the WAN interface burrow.
  6. Enter he remote WAN's IP Address or Internet Name in mywifiext set up and after that enter the neighborhood WAN's IP Address or Internet Name. In this model, we are utilizing their FQDNs. (Both the neighborhood and remote tends to must be of a similar kind—either both must be FQDN or both must be an IP address.)
  7. Snap Apply in the mywifiext.net settings to make the "home" VPN Client. The VPN Policies screen will show appearing the VPN Client approach as empowered.
  8. Snap the IKE Policies tab to show the IKE Policies table and snap Edit contiguous the "home" arrangement to see the "home" strategy subtleties. You can likewise enlarge client confirmation security by empowering the XAUTH server by choosing the Edge Device radio box and after that adding clients to the User. On the other hand, you can likewise decide to choice either a RADIUSCHAP or RADIUS-PAP server.
Designing the VPN Client

From a PC with the Netgear Prosafe VPN Client introduced, you can design a VPN customer arrangement to interface with the DGFV338.

To arrange your VPN customer:
  1. Right-click on the VPN customer symbol in your Windows toolbar and select Security Policy Editorial manager.
  2. In the upper left of the Policy Editor window, click the New Document symbol to open a New Connection.Give the New Connection a name, for example, to_dgfv.
  3. From the ID Type pull-down menu, select IP Subnet.
  4. Enter the LAN IP Subnet Address and Subnet Mask of the DGFV338 LAN.Check the Interface utilizing radio box and select Secure Gateway Tunnel starting from the pull menu.
  5. From the primary ID Type pull-down menus, select Domain Name and enter the FQDN address of the DGFV338.
  6. From the second ID Type pull-down menu, select Gateway IP Address and enter the WAN IP Gateway address of the DGFV338.7. In the left edge, click My Identity.
  7. From the Select Certificate pull-down menu, select None.
  8. From the ID Type pull-down menu, select Domain Name. The esteem entered under Domain Name is ".dvfg_remote.com". In this precedent, we have entered dvfg_remote.com. Up to 50 clients can be served by one arrangement.
  9. Leave Virtual Adapter impaired, and select your PC's Network Adapter. Your current IP address will show up.